The Impurities In C17200 Beryllium Copper Rod

The first is to first make the C17200 beryllium copper rod with a relatively high copper content into a thick plate and use it as an anode. In addition, make pure copper into a thin sheet, which can be used as a cathode. The electrolyte can be used for sulfuric acid and Copper sulfate is mixed together and used. After the electricity is turned on, the copper will move from the anode to the cathode by dissolving into copper ions. When it arrives, electrons will be generated, and pure copper will be produced when it comes back to the cathode. We usually call it electrolytic copper.

The impurities in the C17200 beryllium copper rod, such as some iron and zinc, are more active elements that will be dissolved into ions with the copper. Because these ions are more difficult to precipitate than copper ions, in the case of electrolysis, the potential difference must be reasonably adjusted to prevent them from being precipitated from the anode.

Compared with the C17200 beryllium copper rod, the relatively inactive impurities, such as gold and silver, will accumulate under the electrolytic cell. The C17200 beryllium copper rod produced by this kind of copper is generally called electrolytic copper. It is of good quality and can be used for electrical products. After the electrolytic copper is processed, there will be fine electrolytic copper powder.

C17200 beryllium copper rod is a supersaturated solid solution copper-based alloy. It is a non-ferrous alloy with a good combination of mechanical properties, physical properties, chemical properties and corrosion resistance. After solution and aging treatment, it has the same elasticity as special steel. And fatigue.

At the same time, it has high electrical conductivity, thermal conductivity, high hardness and wear resistance, high creep resistance and corrosion resistance. It is used in the manufacture of various mold inserts, replacing steel molds with high precision and complex shapes, and welding Electrode material, die casting machine, injection molding machine punch, wear and corrosion resistance work, etc. C17200 beryllium copper rods are used in micro-motor brushes, mobile phones, batteries, and products. They are important industrial materials indispensable for the construction of the national economy.

We will be happy to hear your thoughts

Leave a reply

Enable registration in settings - general
Compare items
  • Total (0)